Пропускане към основното съдържание

Rama inspired


Just figured out that i haven't been updating this blog and all other blogs lately, so here we go. :)
I am recently caught up with Arthur Clarke's books and this artwork is inspired by his book "Rendezvous with Rama". The spiral staircase segments in the book caught my attention (and because i already had "rendezvous" with Junji ito's Uzumaki (Spiral), xD) and decided to try something different and crazy with spiral staircases disappearing into the void of the universe ^^.

Credits:

https://pixabay.com/en/spiral-staircase-stairway-design-1208196/

http://feainne-stock.deviantart.com/art/Rage-of-water-166288543
http://sassy-stock.deviantart.com/art/Tropical-Flower-Stock-70342988
http://funerium.deviantart.com/art/Package-Cosmos-6-98670955

Коментари

Публикуване на коментар

Популярни публикации от този блог

Not Machine

... I am not a machine... I am a human...  At last! After like 3 months or so of struggles and stealing from what's left from my free time i finally managed to finish this artwork. It is inspired by the brilliant speech by Charlie Chaplin at the end of his movie "The great dictator" and particularly this part: "Don’t give yourselves to these unnatural men - machine men with machine minds and machine hearts! You are not machines! You are not cattle! You are men! You have the love of humanity in your hearts!" So the idea of the person trying to break free from the machine parts came to my mind instantly. I hope that you will like it!  Credits: https://silviet-stock.deviantart.com/art/Me-fake-blood-strange-pose-10-252626534 https://amka-stock.deviantart.com/art/stock-stormy-sky-credit-and-show-the-result-436785403 https://araken-starway.deviantart.com/art/Iron-Scrap-stock-52726083 https://thecaprice.deviantart.com/art/stockpile-14-93455971 ...
2 коментара
Прочетете още

Vili's bizarre 3D printing adventures, part 2 -The Robo-cat

Hello, dear readers! Welcome to another episode of Vili's bizarre 3D printing adventures! Today I am going to tell you the story of one 3D printed Robo-cat!  It was the award of a challenge me and the other students accepted as part of the 3Ds Max course at CGZEN . Whoever creates the best looking cat will receive a 3D printed model of it. Strangely enough I was given the honor to print the kitty! The lucky winner was Stanislava Zahova and this is her Robo-cat: Robo-cat by Stanislava Zahova Isn't it just cute? :3 Model analysis We can divide the parts in two groups - with and without supports. The head, tail and legs clearly need to be supported, while the paws, neck, body, torso and back won't need any supports at all. In terms of resolution this model can use the faster settings since there aren't much details on it. The cat needed to be scaled just a little bit, not like the previous model we discussed here . The final size was around 12-13 cm high. ...
Публикуване на коментар
Прочетете още

Vili's bizarre 3D printing adventures, part 9 - The lizard warrior

Hello, everyone! I am back with the 100th anniversary post since the beginning of this blog back in 2013! Can't believe seven years passed just like that! The end of  Vili's bizarre 3D printing adventures is slowly moving towards it's end, but don't worry I will continue to write about my personal projects and what I stumbled upon while working on them. The topic of today's journal entry is about one very skilled lizard desert warrior created by Katrin Staneva for the  Character design course at CGZEN . Lizard desert warior by Katrin Staneva He is ready for battle! Better watch out! Model analysis This is not a very easy model to be honest. It is separated into eleven parts in total. There are a lot of details almost everywhere (except for the shoes) and also some of the pieces are small. The model imported into 3Ds Max The object was scaled in 3Ds Max up to 5200% which in Cura resulted as 14 cm height. It is within the limit described in the ...
Публикуване на коментар
Прочетете още